Washing Instruction for DTF Transfers

To wash DTF (Direct-to-Film) printed garments, turn the item inside out and wash in cold
water on a gentle cycle using mild detergent. Avoid bleach, fabric softeners, and high heat,
and either air-dry or tumble dry on a low setting. Do not iron the print directly.

Before Washing

Wait before washing: Allow the print to set for 24 to 48 hours after it has been applied before the first wash.

Washing Instructions

• Turn inside out: Wash the garment inside out to protect the print from friction.
• Use cold water: Always use cold or cool water, as hot water can damage the print and
  adhesive.
• Use a gentle cycle: Select a gentle or delicate wash cycle to prevent cracking and peeling.
• Use mild detergent: Avoid bleach and fabric softeners, which can weaken the print's
  adhesion.
• Avoid ironing the print: If you need to iron the garment, turn it inside out and avoid ironing the design area directly.

Drying Instructions

• Air dry: The best method is to hang the garment to air dry.
• Tumble dry low: If using a dryer, use a low heat setting.
• Avoid high heat: High heat can break down the adhesive and damage the print.